Other tools
|
|
Other tools |
|
work-piece material |
code |
description |
delivered extent |
standart |
picture |
material of tools |
| 1 | 21 |
Conical peeling drils |
6-20mm; 3,5-22,5mm; 6-30mm; 16-30mm; 36-50mm |
|
HSS | |
| 2 | ||||||
| 3 | ||||||
| 6 | ||||||
| 7 | ||||||
| 8 | ||||||
| 9 | ||||||
| 1 | 23 |
Screw extractor No.1 - No.5 | No.1 M3-4,5; No.2 M5-M7; No.3 M8-M10; No.4 M11-M14; No.5 M15-M18 |
|
HCS | |
| 2 | ||||||
| 3 | Screw extractor No.6 | No.6 M20-M30 | ||||
| 6 | Set of screw extractors | No.1 M3-4,5; No.2 M5-M7; No.3 M8-M10; No.4 M11-M14; No.5 M15-M18 | ÈSN 238980 |
|
||
| 7 | ||||||
| 8 | Set od screw extractors with drills | No.1 M3-4,5; No.2 M5-M7; No.3 M8-M10; No.4 M11-M14; No.5 M15-M18 | ÈSN 238980 |
|
||
| 9 | ||||||
| beton | 66 |
SDS-Plus chisel pointed | 250mm |
|
HSS | |
| SDS-Plus chisel flat | 250mm | |||||
| SDS-Plus chisel wide | 250mm | |||||
| SDS-Plus chisel hollow | 250mm | |||||
| SDS-Plus chisel wing | 250mm | |||||
| SDS-Max chisel pointed | 280mm, 400mm, 600mm | |||||
| SDS-Max chisel flat | 280mm, 400mm, 600mm | |||||
| SDS-Max chisel wide | 400mm, 350mm, 300mm | |||||
| SDS-Max chisel wide raked | 400mm, 300mm | |||||
| SDS-Max chisel hollow | 300mm | |||||
| SDS-Max chisel wing | 380mm | |||||
| Sklo | 67 | Glass drills | 2mm-12mm |  |
HSS thanks to diamondground TC plate | |
| Døevo | DV | Slot mortising bits | 6mm-25mm |
|
CS | |
| R1 | Small wedge | è.1 taper sleeve 2/1, 3/1; è.3 taper sleeve 3/2, 4/22, 4/3 | ÈSN 241279 |
|
||
| Morse taper sleeve | 1/0 - 6/5 | ÈSN 241240 |  |
ground, case-hardened | ||
| Morse taper sleeve prolonged | 1/1 -5/5 | ÈSN 241245 |
|
ground, case-hardened | ||
| Inverse morse taper sleeve | 1/2 - 5/6 | ÈSN 241241 | ground, case-hardened | |||
| R2 | Arbor for drill chuck | B 10x1 - B18x1; B10x2 - B22x2; B12x3 | ÈSN 241329 DIN 238 |
|
structural steel, case-hardened, hardened | |
| R3 | Keyless chuck self tightening | USS 6, B12 - USS 16, B16 | ÈSN 241323 |
|
||
| Keyless chuck | USJ 10, B 16-USJ 20, B22 | DIN 6349 |
|
|||
| Keyless chuck | USJ 10x1/2" - 20 UNF 3B - USJ 20x5/8" - 16 UN 3B | DIN 6349 | ||||
| 1 | KV | Morse taper sleeve Weldon with cooling canals | 3 Weldon 19mm with cooling canals |
|
||
| 2 | ||||||
| 3 | ||||||
| 6 | ||||||
| 7 | XE coronal drill weldon shank | 12x30mm, 19x30mm, 50x30mm, 65x50mm, 80x70mm |
|
HSSE-XE | ||
| 8 | ||||||
| 9 | Guide arbor XE | 12x30mm, 50x30mm |
|
| 1 | KONSTRUKÈNÍ OCELI DO 500 Mpa | 6 | CAST IRON |
| 2 | AUTOMATOVÉ A KONSTRUKÈNÍ OCELI DO 900 Mpa | 7 | ALUMINIUM AND ALUMINIUM ALLOYS |
| 3 | ZUŠLECHTÌNÉ A NÁSTROJOVÉ OCELI DO BIS 1250 Mpa | 8 | Copper, Brass, Bronze |
| 4 | NEREZAVÌJÍCÍ A ŽÁRUVZDORNÉ OCELI | 9 | ZINC AND ZINC ALLOYS |
| 5 | VYSOCE LEGOVANÉ OCELI DO 1400 Mpa | 10 | TITANIUM AND TITANIUM ALLOYS |
